The tension system PCB by Scarpa dynamically distributes the forces over the whole foot increasing precision.
SRT Surround Rubber Tension ™
An added layer of M50 Rubber wrapping the forefoot creates additional power towards the tip of the shoe. Additionally the rubber creates high friction and increases sensitivity for toe hooks.
What you get
Closing velcro slipper
The single velcro strap keeps the foot in the shoe fixing the issue of slipping hooks while still providing a versatile freedom in the front. However a good fitting in the toe box is still harder and more dependent on your foot shape.
Synthetic materials tend to not stretch at all keeping the shoe in its shape for longer time and eases the sizing of your shoe. If it fits, it sits! These materials are also preferred by many vegetarians and vegans. A downside is the lower breathability and therefore higher hygienic care.
Toe Pad large
Large toe pads covering the whole forefoot are really useful in bouldering and especially gym bouldering where problems consist of huge volumes. These help to create a good amount of friction at any given angle of the foot while smearing or toe hooking to hold yourself onto the wall. These specialized bouldering shoes need to be fitted well without pain before they can really excel since the rubber itself does not stretch at all.
Lined suede will stretch only around half a size, depending on the sizing even a little more. While the lining adds to keeping the shape of the shoe and providing a tiny bit more comfort, it also adds material between your foot and the rock. This leads to slightly less precision and potentially the development of an odor over time.
Some shoes also come with partial lining e.g. in the toe box only to reduce the stretch selectively. The advantage compared to fully lined suede might be costs and still better breathability and comfort in the rest of the shoe.
The claw-like shape of an aggressive downturn allows you to more efficiently cling onto steep and distant footholds. Since the foot is not in its natural position this shape might cause discomfort over time especially for untrained feet. These shoes excel in very steep terrain and provide the highest hooking capabilities making them the best choice for your project with overhangs and roofs.
Highly asymmetrical shoes create a maximum of pressure towards the tip making them real weapons for boulder problems with micro chrystals! However these type of shoes are a little harder to smear with and can make crack climbing to an unpleasant experience.
Toe Angle high
You can easily compare this to the different grips you are using for climbing holds: the lower the angle the more surface area you can connect and the more friction you can create. Think of gripping a sloper with the full hand, compared to smearing a big part of the sole onto the wall.
This also holds true for smaller features where you crimp up your fingers with a higher angle to create more stability in the grip. Now think of high angled toes within the shoe giving you the ability to stand on really small footholds.
The more tension is provided the more stability you have within the shoe. This increases the ability to put more pressure onto smaller footholds and keeps your foot in place while toe and heel hooking. A shoe with less pre-tension offers more comfort throughout the day and feels more natural for beginner climbers.
How much pre-tension a shoe offers can often be seen at the angle of the heelband towards the sole. Higher tension can also be created with the use of a stronger rubber. This might be indicated e.g. with dots at the back of the shoe.
Foot Width slightly narrow Foot Volume medium Foot Shape pointed Heel Cup average
Sole Vibram® XS Grip 2™ Rubber supersoft
Supersoft rubbers offers immense friction to the shoe. These excel on volumes and big holds, which can be often found indoors. They completely lack support, but will provide you with good comfort and adaptability to your foot.
Sole Thickness 3.5mm Midsole Flexan Midsole Type toes
If and where the midsole is placed plays a major role in the support and sturdiness of the climbing shoe. It creates a platform where you can place your foot on and distribute the pressure from the point of contact to a bigger surface.
Most commonly the midsole starts in the toe box and might be as small as just an insert to support the toes up to a layer of fabric for the whole length of the shoe. Whereas it increases support it also logically lowers the flexibility at the same time making it harder to bend the shoe for smearing. This additional fabric also adds a thin layer between your foot and the rock reducing the ability to feel smaller features.
Midsole Thickness 1mm Tension System PCB™ + SRT™ Heel Cup Sensitivity high
Weight 400g Release Year 2016 List Price 149.95€ List Price 189$
Which size fits
Choose Discipline and Level in the side menu under your profile to get a sizing recommendation!