Lacing provides you with the best personal fit if you struggle with finding comfort with most shoes. Since they provide more comfort these shoes are good for a long day when you don't want to frequently take them off as they need their time to put back on. The laces might compensate excessive stretch and the shoe might feel more secure on microholds by restricting the movement of material. But be careful with toe hooks! With the usually small or missing rubber pad they are hard to place and wear down your laces or outer quicker.
Synthetic materials tend to not stretch at all keeping the shoe in its shape for longer time and eases the sizing of your shoe. If it fits, it sits! These materials are also preferred by many vegetarians and vegans. A downside is the lower breathability and therefore higher hygienic care.
Toe Pad none
Climbing shoes without a toe pad give your foot more space and comfort since the outer material can stretch better and adjust to your foot. If the intended climbing style or the skill level simply does not require toe hooking a lot, a toe pad becomes unnecessary but also the shoe more affordable.
Lined suede will stretch only around half a size, depending on the sizing even a little more. While the lining adds to keeping the shape of the shoe and providing a tiny bit more comfort, it also adds material between your foot and the rock. This leads to slightly less precision and potentially the development of an odor over time.
Some shoes also come with partial lining e.g. in the toe box only to reduce the stretch selectively. The advantage compared to fully lined suede might be costs and still better breathability and comfort in the rest of the shoe.
Moderately downturned shoes are the best choice when looking for an allrounder combining both comfort and performance. The slightly arched profile generates more force into the toe section as well as the heel supporting better edging and heel hooking. These shoes are best worn for climbs ranging from a vertical face to slightly overhanging routes.
Highly asymmetrical shoes create a maximum of pressure towards the tip making them real weapons for boulder problems with micro chrystals! However these type of shoes are a little harder to smear with and can make crack climbing to an unpleasant experience.
Toe Angle low to medium
You can easily compare this to the different grips you are using for climbing holds: the lower the angle the more surface area you can connect and the more friction you can create. Think of gripping a sloper with the full hand, compared to smearing a big part of the sole onto the wall.
This also holds true for smaller features where you crimp up your fingers with a higher angle to create more stability in the grip. Now think of high angled toes within the shoe giving you the ability to stand on really small footholds.
The more tension is provided the more stability you have within the shoe. This increases the ability to put more pressure onto smaller footholds and keeps your foot in place while toe and heel hooking. A shoe with less pre-tension offers more comfort throughout the day and feels more natural for beginner climbers.
How much pre-tension a shoe offers can often be seen at the angle of the heelband towards the sole. Higher tension can also be created with the use of a stronger rubber. This might be indicated e.g. with dots at the back of the shoe.
Foot Width slightly narrow Foot Volume medium Foot Shape pointed Heel Cup average
Sole Vibram® XS Grip™ Rubber soft
The big advantage of soft rubbers are the overall flexibility and generally the increased stickiness yet offer a moderate edging ability. This is best for overhanging routes to reach and stick onto far away footholds. Shoes equipped with these rubbers also allow for very good smearing especially in indoor bouldering, but can fatigue the muscles of your foot quicker due to the lack of support.
Sole Thickness 4mm Midsole 2d PLT 10 Midsole Type unknown (soft)
If and where the midsole is placed plays a major role in the support and sturdiness of the climbing shoe. It creates a platform where you can place your foot on and distribute the pressure from the point of contact to a bigger surface.
Most commonly the midsole starts in the toe box and might be as small as just an insert to support the toes up to a layer of fabric for the whole length of the shoe. Whereas it increases support it also logically lowers the flexibility at the same time making it harder to bend the shoe for smearing. This additional fabric also adds a thin layer between your foot and the rock reducing the ability to feel smaller features.
Tension System RBRX Heel Cup Sensitivity low
Weight 340g List Price € 129.95€ List Price $ 159.95$
Which size fits?
We recommend for your profile to pick this shoe around -0.5 sizes smaller than your Street Shoe Size.